637 Airlines jobs in Bahrain

Company: Gulf Air

Division: Technical

Location: (Location)

Department: Maintenance

Closing Date: 21-Aug-2025

To carry out tasks as designated by the Aircraft Lic Maintenance Technician or Aircraft Maintenance Engineer to an acceptable standard of workmanship, and in accordance with aircraft approved documents.

To support Gulf Air operation at any network station as required in case of AOG recovery or as necessary.

1. Work with, and under the direction of the designated A/C Engineers/Lic Technicians to carry out routine tasks and non-routine tasks.
2. Replace components on Company or other operators aircraft and engines as required.
3. Strictly adhere to company staff rules and regulations.
4. Strictly adhere to company safety rules and regulations and to wear proper uniform and safety shoes while on duty.
5. Adhere and comply with aircraft approved maintenance documents instructions when performing any routine tasks and non-routine tasks and acquaint self with all the safety-related precautions to avoid personal injuries or damages to aircraft structures and systems.
6. Make sure that all equipment and tools used for aircraft maintenance are in serviceable and safe condition. Report any faulty equipment or tool to Engineer or Duty Manager; unserviceable tool/equipment must be isolated and tagged.
7. Service equipment and aircraft special tools as deemed necessary to maintain them in a serviceable, safe and clean condition.
8. As part of maintenance practice, make sure that all tools used to perform any routine and non-routine task are registered, to ensure they are removed on task completion.
9. On completion of routine tasks and non-routine tasks, make sure that work area is tidy and free from any loose articles.
10. Assist in positioning and clearing equipment to carry maintenance tasks on aircraft.
11. Make sure that all tools and equipment used are returned to proper location.
12. Perform the headset duties during engine ground runs and aircraft towing in accordance with company TIM procedures.
13. Adhere to Airside Safety Rules and Regulations in regard to driving and work area cleanliness.
14. Purchase an approved tool kit containing appropriate tools to perform duties on the company and third-party fleets.
15. Perform the required duties in accordance with AME and Duty Manager instructions and aircraft approved documentation procedures.
16. Maintain a high level of self-discipline and respect for superiors' instructions.
17. Become familiar with Gulf Air Information System AMOS and its basic transactions related to this work scope.

It will be advantageous to have 3 to 5 years working as an A/C technician and/or general experience in a similar field. An apprenticeship with a reputable Aircraft Maintenance Organization shall be an additional advantage.

Must be able to write, read and understand English to be able to understand aircraft approved documentation procedures while performing routine and non-routine tasks on the company fleet during maintenance input.
It will be an advantage to pass Basic Aircraft License Modules or hold a valid EASA Basic Aircraft License or equivalent which is recognized by BCAA and company Technical Quality Assurance.

GE13P

If you meet the criteria and you are enthusiastic about the role, we would welcome your application. To complete the application, you would need the following document(s):

• Perform scheduled and unscheduled maintenance on aircraft, including inspections, repairs, and overhauls.
• Diagnose and troubleshoot mechanical, electrical, and avionic systems malfunctions.
• Interpret technical manuals, blueprints, and diagrams to guide maintenance procedures.
• Replace or repair aircraft components and systems as necessary.
• Conduct functional tests of repaired components and systems.
• Document all maintenance activities, including parts used, labor hours, and findings, in accordance with regulatory requirements.
• Ensure compliance with all aviation regulations (e.g., EASA, FAA) and company policies.
• Maintain a clean and organized workspace.
• Collaborate effectively with flight crews, operations personnel, and other maintenance team members.
• Adhere to strict safety protocols and procedures at all times.
• Participate in continuous improvement initiatives to enhance maintenance processes.
• Perform line maintenance and hangar maintenance duties as required.

• Valid Aircraft Maintenance Engineer (AME) license or equivalent certification.
• Minimum of 5 years of hands-on experience in aircraft maintenance.
• Proficiency in maintaining various types of aircraft (e.g., commercial airliners, business jets).
• Strong knowledge of aircraft systems, including engines, hydraulics, pneumatics, avionics, and electrical systems.
• Ability to read and interpret technical documentation, schematics, and blueprints.
• Experience with diagnostic tools and troubleshooting techniques.
• Excellent mechanical aptitude and problem-solving skills.
• Strong attention to detail and commitment to quality workmanship.
• Good communication and teamwork skills.
• Ability to work independently and as part of a team in a fast-paced environment.
• Willingness to work flexible hours, including shifts, weekends, and holidays.

• Supervise and direct a team of aircraft maintenance technicians.
• Ensure all aircraft maintenance is performed according to regulatory requirements and company policies.
• Plan, schedule, and assign daily maintenance tasks.
• Oversee scheduled inspections, routine maintenance, and unscheduled repairs.
• Manage aircraft parts inventory and requisitions.
• Maintain accurate and complete aircraft maintenance records.
• Ensure compliance with all aviation safety regulations (e.g., GACA, EASA).
• Troubleshoot and resolve complex mechanical and technical issues.
• Conduct performance evaluations and provide ongoing training to maintenance staff.
• Promote a strong safety culture and ensure adherence to safety protocols.

• High School Diploma or equivalent; Technical degree in Aviation Maintenance preferred.
• Minimum of 7 years of experience in aircraft maintenance, with at least 3 years in a supervisory or lead role.
• Valid Aircraft Maintenance Engineer (AME) license or equivalent certification.
• Extensive knowledge of aircraft systems, engines, and airframes.
• Strong understanding of aviation regulations and maintenance procedures.
• Proven leadership and team management skills.
• Excellent problem-solving and decision-making abilities.
• Proficiency in computerized maintenance management systems (CMMS).
• Strong communication and interpersonal skills.
• Ability to work flexible hours and adapt to changing operational needs.

• Conduct scheduled and unscheduled maintenance on various aircraft types.
• Perform comprehensive inspections, diagnostics, and repairs of aircraft systems, including engines, hydraulics, avionics, and airframes.
• Troubleshoot and identify the root causes of mechanical and electrical faults.
• Interpret and adhere to aircraft maintenance manuals, technical directives, and service bulletins.
• Document all maintenance actions, inspections, and repairs in accordance with company and regulatory requirements.
• Ensure compliance with all safety regulations and procedures.
• Collaborate effectively with flight crews, ground support, and engineering departments.
• Participate in aircraft component replacements and modifications.
• Maintain a clean and organized workspace in hangar and workshop environments.
• Contribute to continuous improvement initiatives in maintenance processes.

• Relevant certification (e.g., EASA Part-66, FAA Airframe & Powerplant) or equivalent technical diploma.
• Proven experience as an Aircraft Maintenance Engineer.
• In-depth knowledge of aircraft systems and components.
• Proficiency in reading and interpreting technical documentation.
• Strong understanding of aviation safety regulations and practices.
• Excellent troubleshooting and problem-solving abilities.
• Manual dexterity and ability to work with specialized tools and equipment.
• Good communication skills, both written and verbal.
• Ability to work effectively under pressure and meet deadlines.
• Commitment to maintaining the highest standards of safety and quality.

• Perform inspections, maintenance, and repairs on aircraft structures, engines, and components.
• Diagnose and troubleshoot mechanical and electrical issues using specialized tools and equipment.
• Interpret technical manuals, blueprints, and schematics to guide maintenance procedures.
• Carry out scheduled maintenance checks and component replacements as per the maintenance program.
• Document all maintenance activities accurately and in compliance with aviation regulations.
• Ensure that all work performed meets safety and quality standards.
• Collaborate with flight crews and operations personnel to address aircraft issues.
• Maintain a clean and organized workspace, adhering to workshop safety protocols.
• Stay current with the latest aviation technologies, regulations, and best practices.
• Participate in on-call schedules for unscheduled maintenance requirements.
• Operate ground support equipment safely and efficiently.
• Contribute to continuous improvement initiatives within the maintenance department.
• Assist in the training and mentoring of junior technicians.

• Valid Aircraft Maintenance Technician (AMT) license or equivalent certification (e.g., EASA Part-66, FAA A&P).
• Proven experience in the maintenance and repair of commercial or general aviation aircraft.
• Strong knowledge of aircraft systems (hydraulics, pneumatics, avionics, electrical).
• Proficiency in using diagnostic equipment and hand tools specific to aircraft maintenance.
• Ability to read and understand technical documentation in English.
• Excellent troubleshooting and problem-solving skills.
• Strong attention to detail and a commitment to safety.
• Ability to work effectively both independently and as part of a team.
• Good communication and interpersonal skills.
• Physical ability to perform the duties of the job, including climbing, kneeling, and lifting.
• Willingness to work flexible hours and shifts, including weekends and holidays.

• Perform scheduled maintenance and inspections on various aircraft types.
• Troubleshoot and repair mechanical, electrical, and hydraulic systems.
• Interpret technical manuals, blueprints, and schematics.
• Document all maintenance activities and ensure compliance with regulatory requirements.
• Identify and report defective parts or system malfunctions.
• Conduct functional tests and adjustments of aircraft systems.
• Assist in the removal and installation of aircraft components.
• Maintain a clean and organized work environment.
• Adhere to all safety regulations and company policies.
• Participate in ongoing training to stay current with industry advancements.

• High school diploma or equivalent; vocational training in aircraft maintenance preferred.
• Valid Aircraft Maintenance Engineer (AME) license or equivalent certification.
• Proven experience in aircraft maintenance, specific to the types of aircraft operated by the company.
• Strong understanding of aviation regulations and standards.
• Excellent diagnostic and problem-solving skills.
• Proficiency in using maintenance tools and equipment.
• Ability to read and interpret technical documentation.
• Strong commitment to safety and quality.
• Good communication and teamwork skills.
• Physical ability to perform the duties of the role, including working in confined spaces and at heights.

• Perform scheduled and unscheduled maintenance on various aircraft types.
• Conduct thorough inspections and diagnostic tests to identify faults and malfunctions.
• Repair and replace defective aircraft parts and components.
• Interpret technical manuals, blueprints, and engineering drawings.
• Ensure all maintenance activities comply with EASA/FAA regulations and company policies.
• Maintain detailed and accurate records of all maintenance performed, including component serial numbers and labor hours.
• Troubleshoot and resolve complex mechanical, electrical, and avionics issues.
• Collaborate with flight operations to ensure aircraft availability and minimize delays.
• Maintain a clean and organized workspace, adhering to strict safety protocols.
• Participate in continuous training to stay updated on new aircraft technologies and maintenance techniques.

• Bachelor's degree in Aeronautical Engineering, Mechanical Engineering, Electrical Engineering, or a related field, OR an equivalent combination of education and experience.
• Valid EASA Part-66 AML or FAA A&P License, with relevant type ratings.
• Minimum of 5 years of experience in aircraft line or base maintenance.
• In-depth knowledge of aircraft systems, structures, and engines.
• Proficiency in using diagnostic equipment and hand tools.
• Strong understanding of aviation regulations and safety standards.
• Excellent troubleshooting, analytical, and problem-solving skills.
• Ability to work effectively under pressure and meet tight deadlines.
• Good communication and teamwork skills.
• Willingness to work flexible hours, including shifts, weekends, and holidays.

• Perform scheduled and unscheduled maintenance, inspections, and repairs on aircraft structures, engines, and systems.
• Troubleshoot and diagnose mechanical and electrical issues using appropriate diagnostic equipment.
• Dismantle, inspect, repair, replace, or overhaul aircraft components and systems.
• Interpret technical manuals, blueprints, and schematics to perform maintenance tasks accurately.
• Ensure all maintenance activities comply with aviation regulations, manufacturer specifications, and company policies.
• Document all maintenance performed, including parts used, labor hours, and any discrepancies found, in accordance with company and regulatory requirements.
• Maintain a clean and organized work environment, adhering to safety protocols.
• Conduct functional tests and ground runs to verify the effectiveness of repairs.
• Identify and report any defects or issues that could affect aircraft safety or performance.
• Participate in continuous improvement initiatives to enhance maintenance processes and efficiency.
• Collaborate effectively with flight crews, supervisors, and other maintenance personnel.
• Maintain all required certifications and licenses and pursue ongoing training to stay current with technological advancements.
• Manage parts inventory and ensure proper handling and storage of aircraft components.
• Assist in the preparation and positioning of aircraft for maintenance.
• Uphold the highest standards of workmanship and professionalism.

• A valid Airframe and Powerplant (A&P) license or equivalent certification recognized by aviation authorities.
• Proven experience as an Aircraft Maintenance Technician on relevant aircraft types.
• In-depth knowledge of aircraft systems, including hydraulic, pneumatic, electrical, and engine systems.
• Proficiency in using diagnostic tools and specialized aviation maintenance equipment.
• Strong understanding of aviation regulations (e.g., EASA, FAA, or GACA).
• Ability to read and interpret technical manuals, engineering drawings, and schematics.
• Excellent troubleshooting and problem-solving skills.
• Meticulous attention to detail and a strong commitment to safety.
• Ability to work effectively under pressure and meet deadlines.
• Good communication and interpersonal skills.
• Willingness to work flexible hours, including shifts, weekends, and holidays.
• Physical ability to perform demanding tasks, including working in confined spaces and at heights.
• A positive attitude and a team-oriented approach.
• Previous experience with specific aircraft models operated by the client is highly desirable.

• Perform scheduled and unscheduled maintenance, inspections, and repairs on aircraft.
• Diagnose and troubleshoot complex mechanical, electrical, and avionic systems issues.
• Interpret and utilize technical manuals, engineering drawings, and service bulletins.
• Ensure all maintenance activities comply with aviation regulations (e.g., EASA, FAA) and company standards.
• Maintain detailed records of all maintenance performed on aircraft.
• Collaborate with other maintenance personnel, engineers, and flight crew.
• Identify and report any recurring issues or potential safety concerns.
• Utilize specialized tools and diagnostic equipment for aircraft maintenance.
• Contribute to continuous improvement initiatives in maintenance processes.
• Stay up-to-date with the latest advancements in aircraft technology and maintenance practices.
• Respond to aircraft on ground (AOG) situations efficiently and effectively.

• Valid Aircraft Maintenance Engineer (AME) license or equivalent certification recognized by relevant aviation authorities.
• Minimum of 5 years of experience in aircraft maintenance, with a strong background in the types of aircraft relevant to our client's fleet.
• Proven expertise in diagnosing and repairing complex aircraft systems.
• Thorough understanding of aviation regulations and safety protocols.
• Proficiency in using aircraft maintenance software and documentation systems.
• Excellent problem-solving and analytical skills.
• Strong attention to detail and a commitment to safety.
• Ability to work independently and manage time effectively in a remote environment.
• Effective communication and interpersonal skills.
• Ability to pass background checks and security clearances as required for aviation industry roles.