What Jobs are available for Carpenter in Bahrain?
Showing 5 Carpenter jobs in Bahrain
Carpenter
Posted today
Job Viewed
Job Description
willing to work immediately
General Conduct and Safety
- Always follow site safety rules and PPE requirements (helmet, gloves, safety shoes, goggles, etc.).
- Attend toolbox talks and safety briefings before starting work.
- Maintain a clean and organized work area; remove waste and debris daily.
- Never operate power tools or machinery without proper training or authorization.
- Report any accidents, unsafe conditions, or damaged tools immediately to the site supervisor.
2. Technical Duties
- Read and interpret drawings, blueprints, and specifications accurately.
- Carry out measurement, marking, cutting, and assembling of wood, plywood, MDF, or laminate materials as per design.
- Install doors, door frames, skirting, partitions, ceilings, panels, cabinetry, counters, and furniture.
- Perform finishing works such as sanding, edge banding, varnishing, or polishing as required.
- Ensure alignment, level, and proper fixing of all carpentry elements.
- Use power tools (saws, drills, planers, nail guns) responsibly and maintain them in good condition.
3. Quality & Productivity
- Work according to approved drawings and supervisor instructions.
- Maintain high-quality workmanship and follow finishing standards.
- Ensure materials are used efficiently with minimal wastage.
- Report material shortages or damages early to avoid project delays.
- Meet assigned daily and weekly productivity targets.
4. Coordination & Communication
- Coordinate with site foreman, fit-out supervisor, electricians, plumbers, and painters to ensure proper sequencing of works.
- Follow the site schedule and complete assigned areas within the timeline.
- Report progress and any site issues to the foreman or site engineer.
5. Discipline & Attendance
- Follow working hours, break times, and attendance rules strictly.
- No absenteeism or late reporting without valid reason or prior approval.
- Respect all company policies and instructions from supervisors.
Additional Good Practices
- Double-check measurements before cutting — "measure twice, cut once."
- Label and store cut materials properly to prevent confusion or damage.
- Support other team members when necessary to maintain project flow.
- Maintain tools and equipment in good working order; report defects immediately.
Job Type: Full-time
Is this job a match or a miss?
Carpenter
Posted today
Job Viewed
Job Description
The Carpenter is responsible for carrying out carpentry, woodwork, and repair tasks within the property to maintain the highest standards of safety, functionality, and guest satisfaction. This role involves working closely with the engineering/maintenance team to ensure all wooden structures, furniture, fittings, and fixtures are well-maintained, repaired, and presented to support smooth hotel/resort operations.
Key Responsibilities:
- Construct, install, repair, and maintain wooden furniture, fixtures, fittings, partitions, doors, and other wood-related items.
- Perform routine inspections of guest rooms, public areas, restaurants, and back-of-house areas to identify and address carpentry-related issues.
- Repair and refurbish wooden furniture (tables, chairs, cabinets, wardrobes, beds, etc.) to maintain quality standards.
- Assist in renovation and refurbishment projects within the property.
- Safely operate carpentry tools, machinery, and equipment in accordance with safety standards.
- Collaborate with the engineering/maintenance team on preventive maintenance programs.
- Respond promptly to guest and staff repair requests, ensuring minimal disruption.
- Maintain an organized workshop and manage carpentry materials and inventory.
- Ensure compliance with property safety and hygiene policies.
Key Competencies
- Knowledge of Safety Standards – Following workplace safety guidelines and proper handling of tools.
- Compliance with Fire & Building Codes – Ensuring carpentry work aligns with hospitality regulations.
- Material Knowledge – Using durable, sustainable, and guest-safe materials.
- Attention to Detail – Ensuring precision in measurements, alignments, and finishes.
- Problem-Solving – Diagnosing issues with furniture or fittings and finding practical, lasting solutions.
- Communication – Coordinating with housekeeping, engineering, and front office teams for smooth operations.
- Flexibility & Adaptability – Handling urgent repair requests, often at odd hours.
- Teamwork – Collaborating with other maintenance staff, designers, and contractors.
Key Qualities & Skills Required:
- Proven experience as a carpenter, preferably in the hospitality or facilities maintenance sector.
- Strong knowledge of woodworking techniques, finishing, and materials.
- Ability to read and interpret technical drawings, blueprints, and manuals.
- Skilled in using hand tools, power tools, and woodworking machinery.
- Good understanding of safety protocols and maintenance standards.
- Physically fit and able to perform manual tasks.
- Strong attention to detail and problem-solving skills.
- Team player with good communication skills.
Qualifications & Requirements
- High school diploma or equivalent (vocational training in carpentry preferred).
- Minimum 2–3 years of experience in carpentry or maintenance work (hospitality experience is an advantage).
Job Types: Full-time, Permanent
Pay: Up to BD per month
Is this job a match or a miss?
Generl Carpenter
Posted today
Job Viewed
Job Description
Duties and Responsibilities:
- Perform minor carpentry repairs, including fixing doors, locks, handles, hinges, and wooden partitions.
- Carry out tile repairs, minor crack fixing, floor and plaster patchwork.
- Basic knowledge in shuttering, formwork, and scaffolding erection/dismantling.
- Conduct basic plumbing repairs in residential villas, including:
- Fixing leaking taps, pipes, and joints
- Replacing washers, valves, and plumbing fixtures (e.g. hand sprays, mixers, shower mixers)
- Repairing/replacing water pumps and water tanks
- Clearing drain blockages and ensuring proper water flow
- Execute basic electrical tasks, such as:
- Replacing light fixtures
- Installing/fixing switches and sockets
- Pulling and testing electrical cables
- Performing DB panel checks
- Perform basic welding works when required.
- Undertake masonry tasks, such as:
- Block laying
- Plastering
- Surface chipping and repair
- Assist in gypsum work including:
- Channel fixing
- Gypsum board installation
- Carry out painting tasks, including:
- Paint mixing and surface preparation
- General painting maintenance
- Wall polishing, patching, and touch-ups
Qualifications and Requirements:
- Minimum 5 to 7 years of experience in general maintenance and repair.
- Age between 27–35 years.
- Proficient in basic carpentry, plumbing, and electrical work.
- Ability to operate hand and power tools safely and efficiently.
- Knowledge of welding, masonry, gypsum, and painting techniques.
- Good physical condition and stamina.
- Strong attention to detail and work ethic.
- Ability to work independently and collaboratively within a team.
Job Types: Full-time, Permanent
Is this job a match or a miss?
Finishing Carpenter
Posted today
Job Viewed
Job Description
Job Title: Finishing Carpenter
Location: Bahrain
Nationality: Indian nationals only
Accommodation: Provided
Job Description:
Our client is seeking an experienced Finishing Carpenter to join their team in Bahrain. The successful candidate will be responsible for completing finishing
tasks on buildings, including installing trim, molding, doors, and other woodwork.
Key Responsibilities:
- Install and repair trim, molding, doors, and other woodwork
- Finish and refinish surfaces to specifications
- Use hand tools and power tools to complete tasks
- Work from blueprints, drawings, and specifications
- Collaborate with other tradespeople to ensure project completion
Requirements:
- 5+ years of experience as a finishing carpenter
- Strong knowledge of carpentry techniques and materials
- Ability to read and interpret blueprints and drawings
- Excellent problem-solving and communication skills
- Physically fit and able to work at heights and in confined spaces
Is this job a match or a miss?
Building & Engineering - Shift Technician Carpenter
Posted today
Job Viewed
Job Description
Company Description
Radisson Hotel Group is one of the world's largest hotel groups with ten distinctive hotel brands, and more than 1,460 hotels in operation and under development in 95+ countries. The Group's overarching brand promise is Every Moment Matters with a signature Yes I Can service ethos.
People are at the core of our business success and future. Our people are true Moment Makers and together we bring the culture, spirit, environment and opportunities that empower you to be your best, every day, everywhere, every time. Together, we make Every Moment Matter.
Job Description
We are currently seeking a Shift Technician Carpenter. At Al Seef House, we are in search of individuals who go beyond the resume – those with character, skills, talents, and a passion for creating memorable experiences. We value mindset as pivotal: anticipating guest needs, supporting your department, and consistently delivering memorable experiences.
As a Shift Technician Carpenter, you play a vital role in ensuring our properties deliver an experience beyond expectation, creating memorable moments for our guests.
- Our property maintenance team is committed to ensuring everything works as it should, to deliver an experience that is beyond expectation - creating memorable moments for our guests. It's far more than changing a light bulb
- Our Maintenance team love to fix things You will lead by example to be a master multitasker, a fixer, and a doer with the tools to keep our hotels looking top notch.
- As an integral part of the team, you will work proactively to ensure guest satisfaction, health and safety compliance, and the smooth running of the property maintenance department
As Shift Technician Carpenter, you will join a team that is passionate about delivering incredible service where we believe that anything is possible, whilst having fun in all that we do
Qualifications
- Flexibility and a positive, Yes I Can Attitude.
- An eye for detail.
- Is a creative problem-solver.
- Passionate about creating extraordinary service.
- Ability to work as part of a team to ensure guest satisfaction.
- Strong verbal communication skills.
- Likes having fun at work.
- Experience in a similar position is beneficial but not essential.
Additional Information
Why Join Radisson Hotel Group?
Live the Magic of Hospitality - Be part of a team that creates exceptional experiences and memorable moments every day. Let your Yes I Can spirit shine as you bring hospitality to life.
Build a Great Career - No matter your background or experience, we invest in your growth, learning, and career development—helping you reach your full potential.
Experience the Team Spirit - Join a workplace that's inclusive, fun, and meaningful. We celebrate diversity, support one another and foster a sense of belonging through our Employee Resource Groups and inclusion initiatives.
Lead with Your Ambition - Your ideas, passion and drive matter We empower you to make a difference—in hospitality, your community and beyond.
Enjoy Global & Local Perks - No matter where you're located, you'll enjoy exclusive global benefits - like special hotel rates for you and your loved ones at our hotels worldwide. Plus, you'll have access to local perks and rewards tailored to your country, making your experience even more rewarding
Join us in shaping the future of hospitality If you're ready to bring your talent, energy, and passion, we'd love to hear from you.
Apply now and let's make every moment matter.
We welcome applicants from all backgrounds, abilities, and experiences. If you need any adjustments during the application process, please let us know.
Is this job a match or a miss?
Be The First To Know
About the latest Carpenter Jobs in Bahrain !