7 Electrical Maintenance jobs in Bahrain

Company : Gulf Air

Division : Technical

Location : Not specified

Department : Base Maintenance

Closing Date : 25-Apr-2025

The post holder is required to perform all routine and non-routine maintenance tasks on all the current and future fleet in accordance with approved maintenance schedules and documentation, strictly adhering to authority rules and regulations.
He/She will support the recovery of AOG situations and maintain Company and third-party aircraft in accordance with the approved maintenance schedule using approved methods and procedures.

1. Perform Routine & Non-Routine maintenance on Company fleets & Third-party aircraft as per BCAA Regulations & Company Requirements. Supervise assigned Technicians while performing their duties. Certify for all work performed.
2. Obtain company certification authorization to qualify for certifying routine & non-routine maintenance tasks on company fleets within the scope of company approval.
3. Obtain the required certification authorization to certify work performed on third-party aircraft.
4. Perform duties when deemed necessary at short notice to accompany aircraft for routine & non-routine maintenance tasks.
5. Perform any task operationally deemed necessary to maintain the fleet in an airworthy condition.
6. Attend training as per company requirements and sit on company technical boards for obtaining Aircraft Type Certification.
7. Perform technical representation at facilities outside the home base when required by the company.
8. Maintain self-read & write continuation training.
9. Travel when required for the recovery of aircraft during an AOG situation.
10. Strictly adhere to company staff & safety rules & regulations.
11. Comply with approved maintenance documents when performing all maintenance tasks and acquaint self with all safety-related precautions to avoid personal injuries or damages to aircraft structures and systems.
12. Ensure proper tools and equipment used for aircraft maintenance are in serviceable and safe condition at all times. Report any faulty tools or equipment to the Duty Manager.
13. Identify and isolate unserviceable tools/equipment and attach with an unserviceable tag.
14. Ensure all tools used are registered to ensure removal on task completion.
15. Adhere to Airside safety rules and regulations regarding driving and work areas.
16. Comply with the Company policy and procedures as laid down in the Technical Publications (i.e., TIM, MOE, etc.).
17. Maintain a high level of self-discipline and respect towards superiors' instructions.
18. Receive training to perform specialized tasks like boroscope on company fleet engines, structure assessment/repair, and others when operationally required.
19. Deputize for the Duty Manager during absence due to vacation, sickness, or training when necessary.
20. Ensure that all tools, including mechanics toolboxes, are checked before and after each task carried out on the aircraft. CRS must be signed only when all tools are accounted for.

Minimum of 7 years experience in aviation maintenance and 3-5 years as a fully qualified certifying engineer.

Holder of a valid AME license recognized by BCAA and Gulf Air QA, endorsed with Type rating on two of the company aircraft. Must be computer literate and fluent in reading, writing, and speaking English. Must have completed a recognized aircraft engineer apprenticeship/formal training.

If you meet the criteria and are enthusiastic about the role, we would welcome your application. To complete the application, you would need the following document(s):

Select how often (in days) to receive an alert: Create Alert

Location: Sitra Industrial Area, Bahrain

WHO ARE WE?

At Aptar, we use insights, design, engineering and science to create innovative packaging technologies that build brand value for our customers, and, in turn, make a meaningful difference in the lives, looks, health and homes of people around the world.

Every day, Aptar creates “a-ha moments” for its customers and their consumers and patients by continually bringing innovations to market that convert non-dispensing packaging into breakthrough product-dispensing systems, including those that give people more effective ways to put on their favorite fragrance, kids the opportunity to pour ketchup without making a mess and patients connected technologies that help them more easily adhere to treatment.

We have manufacturing facilities in North America, Europe, Asia and South America and over 14,000 dedicated employees in 20 different countries.

YOU SHOULD WORK HERE BECAUSE WE

• Attract and develop high performing people.
• Promote a diverse and inclusive work environment.
• Allow for failure by allowing people to make mistakes through an open and trusting environment.

• Invest in the development of employees through local, regional and global career opportunities.
• Contribute to the communities where we reside.

Position Summary:

The Electrical Technician will be responsible for performing electrical maintenance, troubleshooting, and repair on injection and compression molding machines , ensuring optimal performance and minimizing downtime. The role includes maintaining auxiliary equipment . Reporting to the Electrical Supervisor , the technician will collaborate with the maintenance team to uphold equipment reliability and efficiency.

Position Responsibilities

• Receives instructions from the Electrical Supervisor regarding tasks and priorities.
• Completes all work following established procedures and ensures all spare parts are functional and available.
• Continuously reviews items that require repair, including hydraulics, pneumatics, and electrical systems in injection molding machines.
• Repairs equipment on the shop floor or in the tool shop as quickly as possible to prevent production stoppages.
• Ensure all required documentation is correctly completed and that the maintenance database is updated at the start or end of the shift.
• Responds to breakdowns swiftly to minimize downtime, seeking assistance from the Maintenance department or Electrical Supervisor, when necessary, while recording all incidents in the maintenance database.
• Performs process troubleshooting and equipment modifications under the supervision of the Electrical Supervisor.
• Coordinates with the Maintenance department to ensure all relevant electrical components are included during service, based on the Gulf Closures Maintenance Plan.
• Maintains a clean and organized work area, ensuring spills are addressed immediately.
• Reports any equipment issues that could impact production efficiency.
• Reports unresolved breakdowns due to missing spare parts or unavailable equipment.
• Actively seeks improvements in equipment or procedures, particularly in injection molding process optimization .
• Immediately reports any safety hazards or violations, particularly those related to electrical safety.
• Must be willing to work beyond standard shift hours when required, as the plant operates continuously.
• Works safely at all times, ensuring personal and team safety, while promptly reporting any safety concerns.
• Ensures all parts withdrawn from inventory are properly recorded and signed for on the MID note.
• Undertakes any other reasonable tasks to ensure the smooth and efficient functioning of the department.

Preferred:

• Understanding of electrical electronics, electromechanics, hydro-pneumatics, mechanics, and industrial automation (internal/external) .
• Basic knowledge of PLC programming , particularly for injection molding automation .
• Fundamental understanding of electrical measurements .
• Experience with process troubleshooting in injection molding .
• Familiarity with ISO certification standards for documentation and process control.

Required Qualifications

Qualifications & Requirements:

• Diploma in electrical technical certification.
• Basic knowledge of PLC programming , particularly for injection molding automation .
• Knowledge of electrical diagrams, basic mechanical principles, troubleshooting skills, computer literacy, initiative, and the ability to find rapid solutions to minimize equipment downtime .

WHAT WE OFFER

• An exciting, diverse and value based working environment.
• Award-winning corporate university offering personal development and training opportunities.
• Competitive base salary and performance-based bonus plan.
• Contribute to the communitieswhere we reside.

• An outstanding benefits package, which includes 401(k), retirement savings plan, vacation, medical, dental, vision, maternity/paternity leave, life insurance for you and optional for your dependents, LTD, STD,flex spending, pet care, auto & home, critical

illness, and a wellness program.

BE YOU. BE APTAR.

Aptar is an equal opportunity employer. We believe that a diverse workforce is key to our success. We welcome applications from all members of society irrespective of age, sex, disability, sexual orientation, race, religion or belief.

Position Overview:
The Electrical Technician 1 works under the supervision of the Operations Manager, responsible for electrical installation, maintenance, inspection, and repair of site electrical systems and equipment across water treatment and distribution facilities.

This position description is subject to change at any time as needed to meet the requirements of the program or company.

Perform installation, maintenance, troubleshooting, and repair of low and medium voltage electrical systems.

Inspect and test electrical systems and equipment using standard testing tools.

Maintain and calibrate control panels, motor control centers, and PLCs.

Conduct scheduled and unscheduled maintenance on pumps, motors, generators, and lighting systems.

Monitor the performance of electrical systems and recommend efficiency improvements.

Maintain records and logs of inspections, maintenance, and repairs.

Interpret electrical drawings, diagrams, and schematics.

Respond to electrical emergencies and breakdowns with appropriate corrective actions.

Follow safety procedures and ensure compliance with local and international electrical codes.

Support overall operational effectiveness through proactive maintenance.

Serve as on-site electrical support to the broader operations team, ensuring plant uptime and performance.

Participate in safety, quality, and compliance activities across project sites.

Perform other related duties as assigned, based on operational needs.

Minimum Qualifications:

Education/Certifications:

High School diploma required; technical diploma or certificate in Electrical Engineering preferred.

Valid drivers license with a clean traffic abstract.

Certification as a Licensed Electrician (or equivalent national certification) preferred.

Experience:

2+ years of relevant work experience in industrial or utility electrical systems.

Experience in water treatment or mechanical systems preferred.

Skills:

Strong understanding of electrical systems, controls, and safety codes.

Proficient with electrical testing tools and diagnostic equipment.

Computer proficiency with MS Office Suite.

Must be able to read, write, and speak English fluently.

Good problem-solving, time management, and teamwork abilities.

Other Requirements:

Ability to work in indoor and outdoor environments, including extreme temperatures.

Must be able to lift up to 30 pounds, perform physical tasks including climbing, crouching, and standing for extended periods.

Subject to noise, moving parts, electrical exposure, and working at heights.

Assistance Multi-Task Senior Technician can attend and carry out repair and preventive maintenance works for air conditioning & ventilation units, electrical distribution systems, water supply systems, and plumbing for Gulf Aviation buildings.

1. Attend work order requests from client (GAA/GF) to repair and maintain Air conditioning & ventilation HVAC (including Chilled water system), Electrical/Mechanical/Plumbing (MEP) i.e. electrical circuits and power distribution systems, water supply, sanitary fittings, storage water tanks, water pumps, plumbing, and drainage.
2. Assist in carrying out applicable preventive maintenance program (PPM) for the above-mentioned building services and equipment according to equipment manufacturer’s recommendations and GFG Facilities Management directions.
3. Assist in preparation of daily and monthly service reports including Chiller’s daily inspection report for the above-mentioned Building Services and equipment for attention and action of GFG FM.
4. Assist in preparation of list of necessary spares required for the satisfactory completion of the above-mentioned PPM and routine maintenance.
5. Assist in preparation of report to GFG FM on the required spares and verify the defective spares; moreover, provide root cause of failure report including carrying out troubleshooting for better performance of the equipment.
6. Attend emergency breakdown calls during normal working hours and if required after normal working hours.
7. Attend and close work order requests as soon as possible and report status of the works i.e. completed, on-hold, and which are not completed and provide justification for delays.
8. Assist Senior Technician to update list of existing equipment and building service installations for preparation of maintenance schedules or program of works.
9. Follow-up and supervise outsourced maintenance contractors and ensure that preventive maintenance activities are carried out properly for the special type equipment and services e.g., firefighting & Fire alarm, UPS, Stand-by Generators, Chiller unit, and swimming pool equipment.

Holder of Diploma/High National Diploma in Mechanical Engineering and Technical High School Certificate in Air conditioning engineering or equivalent.

Minimum 3-5 years with any reputable Air-conditioning Contractor or Building Services Facilities Management company in the capacity of Air-conditioning Mechanic and Electrician.

If you meet the criteria and you are enthusiastic about the role, we would welcome your application. To complete the application you would need the following document(s):

Join to apply for the LINE MAINTENANCE TECHNICIAN role at Thales

Join to apply for the LINE MAINTENANCE TECHNICIAN role at Thales

Thales people architect solutions that enable two-thirds of planes to take off and land safely. We create in-flight entertainment systems that engross 50 million fliers every year and we develop the avionics that control the world’s largest commercial aircrafts. Our simulators train the next generation of pilots for fighter jets, transporters and search and rescue helicopters. And, together, each and every member of our aerospace team makes a difference.

JOB OBJECTIVE

Maintain IFEC system on Customer fleet during transit and scheduled checks in a line maintenance environment

Functions & Responsibilities

• Responsible for troubleshooting and testing of IFEC system on-board customer aircrafts in accordance with approved documentation, applicable regulations, and local policy and procedures.
• Ensure adequate qualification to perform task assigned in accordance with the applicable Thales procedures.
• Document work accomplished in accordance with customer’s requirements, Thales and the station specific procedures.
• Use the appropriate GSE equipment for performing the assigned task.
• Performs data and administrative entries using the applicable Maintenance Tracking and documentation systems.
• Accountable for the use of the proper calibrated tools to perform the tasks.
• Checking the work after completion to ensure integrity and pay attention to details.
• Ensure the cleanliness of facility, tools, vehicles and equipment used.
• Use safety net when performing task assigned.
• Follow calibration rules when using calibrated tool.
• Report unsafe act and prevent unsafe behavior.
• Assist other Line Maintenance Technicians when required.
• Comply with Thales Quality and Safety manuals.
  
  
  

• Knowledge of electronics and troubleshooting generally acquired through commercial aviation or technical school education combined with related industry experience (Avionics/IFE) with an airline.
  
  
  

• Bachelor of Science in Aviation Electronics and/or Communication Engineering is preferred.
• Holder of a valid Aircraft Mechanic ICAO licence is a must.
  
  
  

• Communication Skills - Advanced
• Computer skills - Advanced
• English Language skills - Advanced
  
  
  

• Seniority level Not Applicable

• Employment type Full-time

• Job function Management and Manufacturing
• Industries Aviation and Aerospace Component Manufacturing and Defense and Space Manufacturing

Referrals increase your chances of interviewing at Thales by 2x

Manama, Capital Governorate, Bahrain 21 hours ago

Al Khobar, Eastern, Saudi Arabia 1 month ago

Manama, Capital Governorate, Bahrain 2 days ago

Askar, Southern Governorate, Bahrain 4 days ago

Manama, Capital Governorate, Bahrain 2 months ago

The International school of Choueifat, Muharraq Governorate, Bahrain 1 week ago

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

Company: Gulf Air

Division: Technical

Location: (Location)

Department: Maintenance

Closing Date: 21-Aug-2025

To carry out tasks as designated by the Aircraft Lic Maintenance Technician or Aircraft Maintenance Engineer to an acceptable standard of workmanship, and in accordance with aircraft approved documents.

To support Gulf Air operation at any network station as required in case of AOG recovery or as necessary.

1. Work with, and under the direction of the designated A/C Engineers/Lic Technicians to carry out routine tasks and non-routine tasks.
2. Replace components on Company or other operators aircraft and engines as required.
3. Strictly adhere to company staff rules and regulations.
4. Strictly adhere to company safety rules and regulations and to wear proper uniform and safety shoes while on duty.
5. Adhere and comply with aircraft approved maintenance documents instructions when performing any routine tasks and non-routine tasks and acquaint self with all the safety-related precautions to avoid personal injuries or damages to aircraft structures and systems.
6. Make sure that all equipment and tools used for aircraft maintenance are in serviceable and safe condition. Report any faulty equipment or tool to Engineer or Duty Manager; unserviceable tool/equipment must be isolated and tagged.
7. Service equipment and aircraft special tools as deemed necessary to maintain them in a serviceable, safe and clean condition.
8. As part of maintenance practice, make sure that all tools used to perform any routine and non-routine task are registered, to ensure they are removed on task completion.
9. On completion of routine tasks and non-routine tasks, make sure that work area is tidy and free from any loose articles.
10. Assist in positioning and clearing equipment to carry maintenance tasks on aircraft.
11. Make sure that all tools and equipment used are returned to proper location.
12. Perform the headset duties during engine ground runs and aircraft towing in accordance with company TIM procedures.
13. Adhere to Airside Safety Rules and Regulations in regard to driving and work area cleanliness.
14. Purchase an approved tool kit containing appropriate tools to perform duties on the company and third-party fleets.
15. Perform the required duties in accordance with AME and Duty Manager instructions and aircraft approved documentation procedures.
16. Maintain a high level of self-discipline and respect for superiors' instructions.
17. Become familiar with Gulf Air Information System AMOS and its basic transactions related to this work scope.

It will be advantageous to have 3 to 5 years working as an A/C technician and/or general experience in a similar field. An apprenticeship with a reputable Aircraft Maintenance Organization shall be an additional advantage.

Must be able to write, read and understand English to be able to understand aircraft approved documentation procedures while performing routine and non-routine tasks on the company fleet during maintenance input.
It will be an advantage to pass Basic Aircraft License Modules or hold a valid EASA Basic Aircraft License or equivalent which is recognized by BCAA and company Technical Quality Assurance.

GE13P

If you meet the criteria and you are enthusiastic about the role, we would welcome your application. To complete the application, you would need the following document(s):