8 Maintaining jobs in Bahrain

Assistance Multi-Task Senior Technician can attend and carry out repair and preventive maintenance works for air conditioning & ventilation units, electrical distribution systems, water supply systems, and plumbing for Gulf Aviation buildings.

1. Attend work order requests from client (GAA/GF) to repair and maintain Air conditioning & ventilation HVAC (including Chilled water system), Electrical/Mechanical/Plumbing (MEP) i.e. electrical circuits and power distribution systems, water supply, sanitary fittings, storage water tanks, water pumps, plumbing, and drainage.
2. Assist in carrying out applicable preventive maintenance program (PPM) for the above-mentioned building services and equipment according to equipment manufacturer’s recommendations and GFG Facilities Management directions.
3. Assist in preparation of daily and monthly service reports including Chiller’s daily inspection report for the above-mentioned Building Services and equipment for attention and action of GFG FM.
4. Assist in preparation of list of necessary spares required for the satisfactory completion of the above-mentioned PPM and routine maintenance.
5. Assist in preparation of report to GFG FM on the required spares and verify the defective spares; moreover, provide root cause of failure report including carrying out troubleshooting for better performance of the equipment.
6. Attend emergency breakdown calls during normal working hours and if required after normal working hours.
7. Attend and close work order requests as soon as possible and report status of the works i.e. completed, on-hold, and which are not completed and provide justification for delays.
8. Assist Senior Technician to update list of existing equipment and building service installations for preparation of maintenance schedules or program of works.
9. Follow-up and supervise outsourced maintenance contractors and ensure that preventive maintenance activities are carried out properly for the special type equipment and services e.g., firefighting & Fire alarm, UPS, Stand-by Generators, Chiller unit, and swimming pool equipment.

Holder of Diploma/High National Diploma in Mechanical Engineering and Technical High School Certificate in Air conditioning engineering or equivalent.

Minimum 3-5 years with any reputable Air-conditioning Contractor or Building Services Facilities Management company in the capacity of Air-conditioning Mechanic and Electrician.

If you meet the criteria and you are enthusiastic about the role, we would welcome your application. To complete the application you would need the following document(s):

Company: Gulf Air

Division: Technical

Location: (Location)

Department: Maintenance

Closing Date: 21-Aug-2025

To carry out tasks as designated by the Aircraft Lic Maintenance Technician or Aircraft Maintenance Engineer to an acceptable standard of workmanship, and in accordance with aircraft approved documents.

To support Gulf Air operation at any network station as required in case of AOG recovery or as necessary.

1. Work with, and under the direction of the designated A/C Engineers/Lic Technicians to carry out routine tasks and non-routine tasks.
2. Replace components on Company or other operators aircraft and engines as required.
3. Strictly adhere to company staff rules and regulations.
4. Strictly adhere to company safety rules and regulations and to wear proper uniform and safety shoes while on duty.
5. Adhere and comply with aircraft approved maintenance documents instructions when performing any routine tasks and non-routine tasks and acquaint self with all the safety-related precautions to avoid personal injuries or damages to aircraft structures and systems.
6. Make sure that all equipment and tools used for aircraft maintenance are in serviceable and safe condition. Report any faulty equipment or tool to Engineer or Duty Manager; unserviceable tool/equipment must be isolated and tagged.
7. Service equipment and aircraft special tools as deemed necessary to maintain them in a serviceable, safe and clean condition.
8. As part of maintenance practice, make sure that all tools used to perform any routine and non-routine task are registered, to ensure they are removed on task completion.
9. On completion of routine tasks and non-routine tasks, make sure that work area is tidy and free from any loose articles.
10. Assist in positioning and clearing equipment to carry maintenance tasks on aircraft.
11. Make sure that all tools and equipment used are returned to proper location.
12. Perform the headset duties during engine ground runs and aircraft towing in accordance with company TIM procedures.
13. Adhere to Airside Safety Rules and Regulations in regard to driving and work area cleanliness.
14. Purchase an approved tool kit containing appropriate tools to perform duties on the company and third-party fleets.
15. Perform the required duties in accordance with AME and Duty Manager instructions and aircraft approved documentation procedures.
16. Maintain a high level of self-discipline and respect for superiors' instructions.
17. Become familiar with Gulf Air Information System AMOS and its basic transactions related to this work scope.

It will be advantageous to have 3 to 5 years working as an A/C technician and/or general experience in a similar field. An apprenticeship with a reputable Aircraft Maintenance Organization shall be an additional advantage.

Must be able to write, read and understand English to be able to understand aircraft approved documentation procedures while performing routine and non-routine tasks on the company fleet during maintenance input.
It will be an advantage to pass Basic Aircraft License Modules or hold a valid EASA Basic Aircraft License or equivalent which is recognized by BCAA and company Technical Quality Assurance.

GE13P

If you meet the criteria and you are enthusiastic about the role, we would welcome your application. To complete the application, you would need the following document(s):

Join to apply for the LINE MAINTENANCE TECHNICIAN role at Thales

Join to apply for the LINE MAINTENANCE TECHNICIAN role at Thales

Thales people architect solutions that enable two-thirds of planes to take off and land safely. We create in-flight entertainment systems that engross 50 million fliers every year and we develop the avionics that control the world’s largest commercial aircrafts. Our simulators train the next generation of pilots for fighter jets, transporters and search and rescue helicopters. And, together, each and every member of our aerospace team makes a difference.

JOB OBJECTIVE

Maintain IFEC system on Customer fleet during transit and scheduled checks in a line maintenance environment

Functions & Responsibilities

• Responsible for troubleshooting and testing of IFEC system on-board customer aircrafts in accordance with approved documentation, applicable regulations, and local policy and procedures.
• Ensure adequate qualification to perform task assigned in accordance with the applicable Thales procedures.
• Document work accomplished in accordance with customer’s requirements, Thales and the station specific procedures.
• Use the appropriate GSE equipment for performing the assigned task.
• Performs data and administrative entries using the applicable Maintenance Tracking and documentation systems.
• Accountable for the use of the proper calibrated tools to perform the tasks.
• Checking the work after completion to ensure integrity and pay attention to details.
• Ensure the cleanliness of facility, tools, vehicles and equipment used.
• Use safety net when performing task assigned.
• Follow calibration rules when using calibrated tool.
• Report unsafe act and prevent unsafe behavior.
• Assist other Line Maintenance Technicians when required.
• Comply with Thales Quality and Safety manuals.
  
  
  

• Knowledge of electronics and troubleshooting generally acquired through commercial aviation or technical school education combined with related industry experience (Avionics/IFE) with an airline.
  
  
  

• Bachelor of Science in Aviation Electronics and/or Communication Engineering is preferred.
• Holder of a valid Aircraft Mechanic ICAO licence is a must.
  
  
  

• Communication Skills - Advanced
• Computer skills - Advanced
• English Language skills - Advanced
  
  
  

• Seniority level Not Applicable

• Employment type Full-time

• Job function Management and Manufacturing
• Industries Aviation and Aerospace Component Manufacturing and Defense and Space Manufacturing

Referrals increase your chances of interviewing at Thales by 2x

Manama, Capital Governorate, Bahrain 21 hours ago

Al Khobar, Eastern, Saudi Arabia 1 month ago

Manama, Capital Governorate, Bahrain 2 days ago

Askar, Southern Governorate, Bahrain 4 days ago

Manama, Capital Governorate, Bahrain 2 months ago

The International school of Choueifat, Muharraq Governorate, Bahrain 1 week ago

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.