7 New Materials jobs in Bahrain
Materials Inspector
Manama, Capital
Parsons
Posted today
Job Viewed
Job Description
**Materials Inspector**
**Bahrain**
**What You’ll Be Doing**
- The Materials Inspector under general supervision, performs difficult and sometimes complex inspection tasks.
- Inspects various facets of work on the construction site and performs continuous surveillance of assigned construction activities to ensure compliance with all applicable codes, standards, and specifications.
- Documents nonconformance and may participate in determining appropriate resolution.
- Have full awareness of testing requirements.
- Check material submissions and properly process approvals.
- Visit factories to ensure proper manufacture and testing of materials produced.
- Ensure materials delivered are as approved and are properly stored.
- Assist in the development of testing procedures.
- Keep up-to-date with new appropriate materials.
**What Required Skills You’ll Bring**
- Diploma in Civil Engineering with minimum 7 years relevant experience in laboratory materials testing including field inspection of samples and materials. Familiarity with all asphalt concrete and soil materials used in highway and bridge construction.
- Familiarity with all asphalt concrete and soil materials used in highway and bridge construction.
- Computer literacy and excellent communication skills are essential.
- Must be able to read and interpret blueprints and construction specifications and be thoroughly familiar with construction-related processes related to area of assignment.
**What Desired Skills You’ll Bring**
- Must possess the ability to read working drawings and related specifications.
**Minimum Clearance Required to Start**:
Not Applicable/None
Parsons is an equal opportunity employer committed to diversity in the workplace. Minority/Female/Disabled/Protected Veteran.
**Bahrain**
**What You’ll Be Doing**
- The Materials Inspector under general supervision, performs difficult and sometimes complex inspection tasks.
- Inspects various facets of work on the construction site and performs continuous surveillance of assigned construction activities to ensure compliance with all applicable codes, standards, and specifications.
- Documents nonconformance and may participate in determining appropriate resolution.
- Have full awareness of testing requirements.
- Check material submissions and properly process approvals.
- Visit factories to ensure proper manufacture and testing of materials produced.
- Ensure materials delivered are as approved and are properly stored.
- Assist in the development of testing procedures.
- Keep up-to-date with new appropriate materials.
**What Required Skills You’ll Bring**
- Diploma in Civil Engineering with minimum 7 years relevant experience in laboratory materials testing including field inspection of samples and materials. Familiarity with all asphalt concrete and soil materials used in highway and bridge construction.
- Familiarity with all asphalt concrete and soil materials used in highway and bridge construction.
- Computer literacy and excellent communication skills are essential.
- Must be able to read and interpret blueprints and construction specifications and be thoroughly familiar with construction-related processes related to area of assignment.
**What Desired Skills You’ll Bring**
- Must possess the ability to read working drawings and related specifications.
**Minimum Clearance Required to Start**:
Not Applicable/None
Parsons is an equal opportunity employer committed to diversity in the workplace. Minority/Female/Disabled/Protected Veteran.
This advertiser has chosen not to accept applicants from your region.
0
Product Development Engineer
Sitra, Central
Deeko Bahrain
Posted today
Job Viewed
Job Description
Male; 35 to 45 years old
- Degree in Engineering (Mechanical/Chemical/ Electrical/ Electronics/ Polymer)
- At least 5 years in handling product development and research and development, quality assurance in the plastic/ polymer and aluminium industry an added advantage
- Experienced in product development, product reengineering, and innovation
- Technically sound, creative, innovative, methodical, efficient, and accurate
- Experienced in setting up plant, project analysis and implementation
- With composite knowledge that can come handy when preparing feasibility data.
- With sound knowledge on international requirements and standards in the field of FMCG products
**Job Description / Responsibilities**
- To be the driving force in the development of new products, ranges, adding to existing ranges by extending the number of SKUs, and instrumental in automation or labor saving techniques.
- To ensure proper market information is received from the local sales and export department so that we can ensure any new product/ range developed is competitive from the start.
- To ensure to liaise with all departments to ensure feasibilities are positive and all preparations either on the approval in the factory or procurement wise of packaging are arranged in time. All POs to be raised after strong negotiation with best terms included.
- Ensure equipment on commissioning performs against expectations. If not, need to correct or get compensation on performance levels.
- To conceptualize/ envision new designs/ materials and changes to current product standards to meet changing market needs.
- To design major components or major portions of a functional system to develop or improve products and facilitate manufacturing operations.
- To work with a cross functional team to develop new products and/or improve existing/ current products.
- To verify machine performance against machine producer’s standards and product performance through analysis and testing, identify product non-conformances, design errors, omissions, and other deficiencies, and implements revisions and/or improvements.
- To bring down the cost of production through the replacement of existing technology where necessary and prove more efficient, faster, and cost effective, scrap saving (where generated). Moulds should also be configured for maximum number of cycles/ strokes per minute for excellent product performance in terms of mechanical properties and minimum wastage and maximum strength.
**Job Types**: Full-time, Permanent
Ability to commute/relocate:
- Sitra: Reliably commute or willing to relocate with an employer-provided relocation package (required)
Application Question(s):
- Do you have experience in setting new line in Production?
- Do you take part of commissioning?
- What product you have developed before or currently developing?
**Experience**:
- Product Development: 5 years (preferred)
- Degree in Engineering (Mechanical/Chemical/ Electrical/ Electronics/ Polymer)
- At least 5 years in handling product development and research and development, quality assurance in the plastic/ polymer and aluminium industry an added advantage
- Experienced in product development, product reengineering, and innovation
- Technically sound, creative, innovative, methodical, efficient, and accurate
- Experienced in setting up plant, project analysis and implementation
- With composite knowledge that can come handy when preparing feasibility data.
- With sound knowledge on international requirements and standards in the field of FMCG products
**Job Description / Responsibilities**
- To be the driving force in the development of new products, ranges, adding to existing ranges by extending the number of SKUs, and instrumental in automation or labor saving techniques.
- To ensure proper market information is received from the local sales and export department so that we can ensure any new product/ range developed is competitive from the start.
- To ensure to liaise with all departments to ensure feasibilities are positive and all preparations either on the approval in the factory or procurement wise of packaging are arranged in time. All POs to be raised after strong negotiation with best terms included.
- Ensure equipment on commissioning performs against expectations. If not, need to correct or get compensation on performance levels.
- To conceptualize/ envision new designs/ materials and changes to current product standards to meet changing market needs.
- To design major components or major portions of a functional system to develop or improve products and facilitate manufacturing operations.
- To work with a cross functional team to develop new products and/or improve existing/ current products.
- To verify machine performance against machine producer’s standards and product performance through analysis and testing, identify product non-conformances, design errors, omissions, and other deficiencies, and implements revisions and/or improvements.
- To bring down the cost of production through the replacement of existing technology where necessary and prove more efficient, faster, and cost effective, scrap saving (where generated). Moulds should also be configured for maximum number of cycles/ strokes per minute for excellent product performance in terms of mechanical properties and minimum wastage and maximum strength.
**Job Types**: Full-time, Permanent
Ability to commute/relocate:
- Sitra: Reliably commute or willing to relocate with an employer-provided relocation package (required)
Application Question(s):
- Do you have experience in setting new line in Production?
- Do you take part of commissioning?
- What product you have developed before or currently developing?
**Experience**:
- Product Development: 5 years (preferred)
This advertiser has chosen not to accept applicants from your region.
1
Design & Technology Teacher – Resistant Materials
Manama, Capital
RESO
Posted 21 days ago
Job Viewed
Job Description
Job Overview
Due to our exciting continued growth, we seek to appoint an outstanding Secondary Design & Technology Teacher - Resistant Materials Teacher for an August 2025 start. We are introducing this subject for the first time across our Key Stage 3 curriculum so will be looking for a passionate Technology Techer to write and deliver a scheme of work suitable for our school situated in Bahrain. As the first full-time Resistant Materials Technology teacher within the secondary school, we would be looking for you to create opportunities for pupils to showcase their talents outside the curriculum and help raise the profile of Technology within the school and the local community.
We Are Looking For Certain Qualities
Experienced specialist subject teacher using the English National Curriculum at Secondary level including IGCSE and Key Stage 5.
Skilled in the best global educational practices
Committed to developing and inspiring every student, to believe that they can and will succeed
Connects with pupils and teaches engaging lessons to form happy, creative and confident learners.
Tech-savvy, and fluent in using technology to extend and enrich each student’s learning experience
Outstanding role models who embody our core values
Passionate about providing enriched learning opportunities for children in and out of the classroom
Is committed to their own CPD.
Excellent communicators who can ignite a passion for learning in our students.
Strong academic background, work ethic, well-organised having excellent interpersonal skills
Dynamic, enthusiastic, and well-qualified candidate holding as a minimum, a B.Ed. or a B.A & PGCE and QTS.
Application Process
If you have the passion, energy, and commitment to drive accelerated outcomes for young people, we will welcome your application. In return, you will join a rapidly evolving organisation that can offer you a central role in our future growth plans.
Please apply through the TES portal with your supporting statement, CV and details of 3 referees, one of which must be your most recent employer.
Due to the anticipated large number of applications, we will only contact those who are shortlisted for the initial conversation with will be held via Microsoft Teams.
The closing date for applications is the 30 July 2025. Please note that due to the expected volume of applications, only shortlisted candidates will be contacted for an interview. The school reserves the right to make suitable appointments before the official closing date, and therefore we would encourage candidates to apply early in the process. The appointment start date will be August 2025.
Capital School is dedicated to safeguarding and promoting the welfare of children and young people in our care. We adhere to safe recruitment practices, and all appointments are subject to comprehensive vetting, including reference checks, identity verification, internet screening, and criminal record checks. #J-18808-Ljbffr
Due to our exciting continued growth, we seek to appoint an outstanding Secondary Design & Technology Teacher - Resistant Materials Teacher for an August 2025 start. We are introducing this subject for the first time across our Key Stage 3 curriculum so will be looking for a passionate Technology Techer to write and deliver a scheme of work suitable for our school situated in Bahrain. As the first full-time Resistant Materials Technology teacher within the secondary school, we would be looking for you to create opportunities for pupils to showcase their talents outside the curriculum and help raise the profile of Technology within the school and the local community.
We Are Looking For Certain Qualities
Experienced specialist subject teacher using the English National Curriculum at Secondary level including IGCSE and Key Stage 5.
Skilled in the best global educational practices
Committed to developing and inspiring every student, to believe that they can and will succeed
Connects with pupils and teaches engaging lessons to form happy, creative and confident learners.
Tech-savvy, and fluent in using technology to extend and enrich each student’s learning experience
Outstanding role models who embody our core values
Passionate about providing enriched learning opportunities for children in and out of the classroom
Is committed to their own CPD.
Excellent communicators who can ignite a passion for learning in our students.
Strong academic background, work ethic, well-organised having excellent interpersonal skills
Dynamic, enthusiastic, and well-qualified candidate holding as a minimum, a B.Ed. or a B.A & PGCE and QTS.
Application Process
If you have the passion, energy, and commitment to drive accelerated outcomes for young people, we will welcome your application. In return, you will join a rapidly evolving organisation that can offer you a central role in our future growth plans.
Please apply through the TES portal with your supporting statement, CV and details of 3 referees, one of which must be your most recent employer.
Due to the anticipated large number of applications, we will only contact those who are shortlisted for the initial conversation with will be held via Microsoft Teams.
The closing date for applications is the 30 July 2025. Please note that due to the expected volume of applications, only shortlisted candidates will be contacted for an interview. The school reserves the right to make suitable appointments before the official closing date, and therefore we would encourage candidates to apply early in the process. The appointment start date will be August 2025.
Capital School is dedicated to safeguarding and promoting the welfare of children and young people in our care. We adhere to safe recruitment practices, and all appointments are subject to comprehensive vetting, including reference checks, identity verification, internet screening, and criminal record checks. #J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
2
Senior New Product Development (NPD) Chef
Manama, Capital
RESO
Posted 1 day ago
Job Viewed
Job Description
About Calo
Launched in Bahrain in November of 2019, Calo is on a mission to make healthy easy. We’re a team of dedicated people driving this mission by providing better, faster, and cheaper ways to access food through technology.
Role Overview
To function as a New Product Development (NPD) Sous Chef for Calo and contribute to long-term food product development that aligns with the organizational goals and objectives. e.g. new product development and the expansion of existing product lines. You’ll be working closely with the R&D team to formulate and test new recipes and to improve existing recipes.
Main Responsibilities
Qualifications
UIuyOpMubO #J-18808-Ljbffr
Launched in Bahrain in November of 2019, Calo is on a mission to make healthy easy. We’re a team of dedicated people driving this mission by providing better, faster, and cheaper ways to access food through technology.
Role Overview
To function as a New Product Development (NPD) Sous Chef for Calo and contribute to long-term food product development that aligns with the organizational goals and objectives. e.g. new product development and the expansion of existing product lines. You’ll be working closely with the R&D team to formulate and test new recipes and to improve existing recipes.
Main Responsibilities
- Managing new product development projects by researching consumer markets, and developing new product concepts and prototypes
- Brainstorming ideas for new products or existing product modifications/add-ons
- Analyzing and evaluating trial results to make the necessary adjustments to ingredients, formulations, processes, and equipment prior to full-scale production
- Actively Communicate with relevant stake holders for product launches and sourcing
- To make and manage samples creation when requested
- To create each product with full insight of Shelf life, allergens, ingredients cost and process
- Ensures that the stations are kept in a clean and orderly fashion
- Ensures that all equipment within the R&D space is correctly handled and maintained
- Establishes and maintains effective employee relations
- Complies with Calo Health, Safety & Hygiene policy
- Performs related duties and special projects as assigned
Qualifications
- The candidate should have a minimum of 5 years of experience as a CDP or sous chef
- Must be able to able to initiate, plan and implement new product development projects
- Following recipes and formulations to create and evaluate product samples
- Experience with multiple cuisines or fusion cuisines is a major plus
- Able to communicate well in English
- Working knowledge of MS Office (Word, Excel)
- Knowledge of various cooking methods, ingredients, and procedures
- Create and maintain an efficient, hygienic, and positive working environment
- Display good work ethic, resourcefulness, and organization
- Must be able to work under pressure and manage time accordingly
- Ensure quality control and efficient workflow
- Familiarity with the industry’s best practices
- Strong time-management skills, able to finish tasks in a timely manner, and stick to deadlines
- Strong communicator
- Eager to learn
- Friendly and pleasant personality that is able to work with empathy and patience with other team members
- Punctuality
UIuyOpMubO #J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
3
Senior New Product Development (NPD) Chef
Manama, Capital
Calo Inc
Posted 5 days ago
Job Viewed
Job Description
About Calo
Launched in Bahrain in November of 2019, Calo is on a mission to make healthy easy. We’re a team of dedicated people driving this mission by providing better, faster, and cheaper ways to access food through technology.
Role Overview
To function as a New Product Development (NPD) Sous Chef for Calo and contribute to long-term food product development that aligns with the organizational goals and objectives. e.g. new product development and the expansion of existing product lines. You’ll be working closely with the R&D team to formulate and test new recipes and to improve existing recipes.
Main Responsibilities
- Managing new product development projects by researching consumer markets, and developing new product concepts and prototypes.
- Brainstorming ideas for new products or existing product modifications/add-ons
- Analyzing and evaluating trial results to make the necessary adjustments to ingredients, formulations, processes, and equipment prior to full-scale production.
- Actively Communicate with relevant stake holders for product launches and sourcing
- To make and manage samples creation when requested
- To create each product with full insight of Shelf life, allergens, ingredients cost and process.
- Ensures that the stations are kept in a clean and orderly fashion
- Ensures that all equipment within the R&D space is correctly handled and maintained
- Establishes and maintains effective employee relations
- Complies with Calo Health, Safety & Hygiene policy
- Performs related duties and special projects as assigned
Ideal Candidate
Qualifications
- The candidate should have a minimum of 5 years of experience as a CDP or sous chef
- Must be able to able to initiate, plan and implement new product development projects
- Following recipes and formulations to create and evaluate product samples
- Experience with multiple cuisines or fusion cuisines is a major plus
- Able to communicate well in English
- Working knowledge of MS Office (Word, Excel)
Knowledge and Competency
- Knowledge of various cooking methods, ingredients, and procedures.
- Create and maintain an efficient, hygienic, and positive working environment
- Display good work ethic, resourcefulness, and organization
- Must be able to work under pressure and manage time accordingly
- Ensure quality control and efficient workflow
- Familiarity with the industry’s best practices
- Strong time-management skills, able to finish tasks in a timely manner, and stick to deadlines.
Personality
- Strong communicator
- Eager to learn
- Friendly and pleasant personality that is able to work with empathy and patience with other team members
- Punctuality
This advertiser has chosen not to accept applicants from your region.
4
Assistant Professor in Mechanical Engineering with Specialization in Materials
RESO
Posted 6 days ago
Job Viewed
Job Description
Assistant Professor in Mechanical Engineering with Specialization in Materials
Job Title: Assistant Professor in Mechanical Engineering with specialization in Materials
Department: Mechanical and Electrical Engineering
College: Engineering
Reports to: Head of Department; Dean
Closing Date: March 26, 2021, 11:59:00 PM
Introduction: Gulf University is one of the reputed private and Higher Education Council accredited universities in Bahrain. The university has also received full confidence judgement for BQA (Educational & Training Quality Authority, Bahrain) institutional review. Gulf University embraces excellence through its fit for purpose academic programs in various disciplines. All the academic programs have been achieved confidence under BQA program review.
The Department of Mechanical and Electrical Engineering at Gulf University invites applications for Assistant Professor position in Mechanical Engineering. The Department and the College of Engineering value both teaching and research in their endeavor to offer quality academic programs. The candidate will be a member of an experienced, diverse and professional team of scholars that will make a significant contribution in the field of Mechanical Engineering.
- Expected Qualifications:
- PhD in Mechanical Engineering from a higher education institute recognized by Higher Education Council (HEC) Bahrain.
- Expected Experience:
- A minimum of three years’ experience of teaching different courses in Mechanical Engineering (in the specialization and other related courses).
- A minimum of two years of relevant industrial experience in various Non Destructive testing (NDT) techniques, physical and microstructure based material properties, material selection.
- Experience in developing course specifications as per the National Qualification Framework and international accreditation standards.
- Experience in utilizing different software relevant to the specialization.
- Strong and recognized research profile.
- Required Skills:
- Leadership: Skills that help the candidate to work effectively with and garner respect from students, parents, and the community.
- Teaching skills: Ability to practice innovative and student-centric teaching methods and manage quality enhancement in higher education environment.
- Excellent written and oral communication skills.
- Digital fluency.
- Ability to work with students from different cultures and backgrounds.
- Interpersonal skills.
- Roles and Responsibilities:
- Documents needed:
- Application Form
- Copy of earned credential (BSc, Master, and PhD).
- Current Curriculum Vitae
- Cover letter
- Teaching, learning and research philosophy
- Three referees’ contact information (email as well as their telephone numbers).
- Any additional documentation that you feel is relevant to your application.
This advertiser has chosen not to accept applicants from your region.
5
Development Engineer (New Product)
Sitra, Central
Deeko Bahrain
Posted today
Job Viewed
Job Description
Qualifications:
- Male; 35 to 45 years old
- Degree in Engineering (Mechanical/Chemical/ Electrical/ Electronics/ Polymer)
- At least 5 years in handling product development and research and development, quality assurance in the plastic/ polymer and aluminium industry an added advantage
- Experienced in product development, product re-engineering, and innovation
- Technically sound, creative, innovative, methodical, efficient, and accurate
- Experienced in setting up plant, project analysis and implementation
- With composite knowledge that can come handy when preparing feasibility data.
- With sound knowledge on international requirements and standards in the field of FMCG products
**Job Description / Responsibilities**
- To be the driving force in the development of new products, ranges, adding to existing ranges by extending the number of SKUs, and instrumental in automation or labor saving techniques.
- To ensure proper market information is received from the local sales and export department so that we can ensure any new product/ range developed is competitive from the start.
- To ensure to liaise with all departments to ensure feasibilities are positive and all preparations either on the approval in the factory or procurement wise of packaging are arranged in time. All POs to be raised after strong negotiation with best terms included.
- Ensure equipment on commissioning performs against expectations. If not, need to correct or get compensation on performance levels.
- To conceptualize/ envision new designs/ materials and changes to current product standards to meet changing market needs.
- To design major components or major portions of a functional system to develop or improve products and facilitate manufacturing operations.
- To work with a cross functional team to develop new products and/or improve existing/ current products.
- To verify machine performance against machine producer’s standards and product performance through analysis and testing, identify product non-conformances, design errors, omissions, and other deficiencies, and implements revisions and/or improvements.
- To bring down the cost of production through the replacement of existing technology where necessary and prove more efficient, faster, and cost effective, scrap saving (where generated). Moulds should also be configured for maximum number of cycles/ strokes per minute for excellent product performance in terms of mechanical properties and minimum wastage and maximum strength.
**Job Types**: Full-time, Permanent
Ability to commute/relocate:
- Sitra: Reliably commute or planning to relocate before starting work (required)
- Male; 35 to 45 years old
- Degree in Engineering (Mechanical/Chemical/ Electrical/ Electronics/ Polymer)
- At least 5 years in handling product development and research and development, quality assurance in the plastic/ polymer and aluminium industry an added advantage
- Experienced in product development, product re-engineering, and innovation
- Technically sound, creative, innovative, methodical, efficient, and accurate
- Experienced in setting up plant, project analysis and implementation
- With composite knowledge that can come handy when preparing feasibility data.
- With sound knowledge on international requirements and standards in the field of FMCG products
**Job Description / Responsibilities**
- To be the driving force in the development of new products, ranges, adding to existing ranges by extending the number of SKUs, and instrumental in automation or labor saving techniques.
- To ensure proper market information is received from the local sales and export department so that we can ensure any new product/ range developed is competitive from the start.
- To ensure to liaise with all departments to ensure feasibilities are positive and all preparations either on the approval in the factory or procurement wise of packaging are arranged in time. All POs to be raised after strong negotiation with best terms included.
- Ensure equipment on commissioning performs against expectations. If not, need to correct or get compensation on performance levels.
- To conceptualize/ envision new designs/ materials and changes to current product standards to meet changing market needs.
- To design major components or major portions of a functional system to develop or improve products and facilitate manufacturing operations.
- To work with a cross functional team to develop new products and/or improve existing/ current products.
- To verify machine performance against machine producer’s standards and product performance through analysis and testing, identify product non-conformances, design errors, omissions, and other deficiencies, and implements revisions and/or improvements.
- To bring down the cost of production through the replacement of existing technology where necessary and prove more efficient, faster, and cost effective, scrap saving (where generated). Moulds should also be configured for maximum number of cycles/ strokes per minute for excellent product performance in terms of mechanical properties and minimum wastage and maximum strength.
**Job Types**: Full-time, Permanent
Ability to commute/relocate:
- Sitra: Reliably commute or planning to relocate before starting work (required)
This advertiser has chosen not to accept applicants from your region.
Be The First To Know
About the latest New materials Jobs in Bahrain !
6