16 Plumber jobs in Bahrain

Job Location

Manama,

Bahrain

Experience

0 to 5 years

Qualification Level

ITI / Vocational

Job Function

Helpers / Loaders / Gardener / Unskilled Labour

Skilled Labour / Painting / Tailoring

Skillset

Carry out regular maintenance of plumbing works

Preferred Jobseekers

Locally available candidates only apply for this job

Carry out regular maintenance of plumbing works

Perform any necessary repairs to previously installed systems

Communicate well with clients to ensure client satisfaction

Should be locally available in Bahrain and ready for immediate mobilisation.

willing to join immediately

1. Key Roles and ResponsibilitiesA. Installation Works

• Install, connect, and test all plumbing and sanitary systems (cold/hot water lines, drainage, waste, vent systems).
• Fit and install fixtures and equipment such as wash basins, sinks, toilets, showers, water heaters, and kitchen fittings.
• Assist in installing firefighting and irrigation lines (if applicable to the fit-out scope).
• Ensure proper alignment, slope, and leak-free joints in all piping systems.

B. Coordination

• Coordinate plumbing works with MEP, civil, and interior finishing teams to avoid clashes with electrical conduits, false ceilings, and furniture layouts.
• Follow shop drawings and installation details provided by the QS/Draftsman or Engineer.
• Report any discrepancies between site conditions and drawings to the site engineer.

C. Maintenance and Testing

• Conduct pressure testing for water lines and leak tests for drainage systems.
• Repair and replace damaged pipes, fittings, or fixtures as required.
• Perform final commissioning checks before handover.

D. Safety and Compliance

• Follow all health and safety guidelines on-site, using proper PPE and tools.
• Ensure all installations comply with local plumbing codes, standards, and specifications.
• Maintain a clean and organized work area during and after installation.

E. Documentation and Reporting

• Record completed works and materials used daily.
• Assist in preparing as-built drawings by marking actual pipe routes and fixture locations.
• Inform supervisors about material shortages or technical issues.

2. Skills and Competencies

• Knowledge of plumbing systems, fittings, and sanitary installations.
• Ability to read and interpret plumbing/shop drawings.
• Skill in using plumbing tools and testing equipment.
• Awareness of safety standards and environmental regulations.
• Teamwork and coordination with other trades (electrical, carpentry, HVAC, etc.).

3. Tools and Equipment Used

• Pipe threading and cutting machines
• Welding/soldering tools (as required)
• Pressure testing kits
• Wrenches, pliers, and sealant materials

4. Reporting Structure

• Reports to: MEP / Fit-Out Engineer or Site Supervisor
• Coordinates with: Electricians, HVAC Technicians, Civil Foreman, Draftsman

Job Type: Full-time

Job Summary:

We are looking for a skilled and experienced Plumber to support the installation, maintenance, and repair of piping systems in oil and gas facilities in Bahrain. The ideal candidate will have a strong understanding of plumbing systems used in industrial and commercial environments, ensuring high-quality workmanship and compliance with safety and regulatory standards.

Key Responsibilities:

• Install, repair, and maintain piping systems, water supply lines, sanitary systems, and drainage in industrial and site facilities.
• Read and interpret blueprints, drawings, and technical specifications.
• Cut, thread, and assemble pipes and fittings made of materials such as steel, copper, PVC, and PPR.
• Inspect and test plumbing systems for leaks and proper operation.
• Repair broken or leaking pipes, valves, and fixtures using hand tools or power tools.
• Collaborate with engineers, supervisors, and other tradesmen to complete tasks efficiently.
• Follow company safety procedures, including permit-to-work systems and PPE requirements.
• Keep records of work performed and materials used.

Job Type: Full-time

CAN WORK IMMEDITIATELY

Duties of a Plumber in Fit-Out Projects

• Installation Works
• Install, repair, and maintain water supply lines, drainage systems, and sanitary fixtures (toilets, sinks, bathtubs, water heaters, etc.).
• Fit and connect pipes, valves, and fittings according to drawings and specifications.
• Install kitchen, bathroom, and pantry plumbing fixtures during the fit-out stage.
• Testing & Commissioning
• Test water supply and drainage systems for leaks, pressure, and proper functionality.
• Ensure systems comply with local regulations and safety standards.
• Maintenance & Repairs
• Carry out preventive and corrective maintenance on plumbing systems.
• Respond to emergency plumbing issues such as blockages, leaks, or burst pipes during and after project execution.
• Coordination
• Work closely with the fit-out supervisor, electricians, and other trades to ensure proper installation sequence.
• Coordinate with contractors and engineers for design changes or technical clarifications.
• Compliance & Safety
• Follow company and site health & safety rules.
• Ensure plumbing installations meet building codes, standards, and client requirements.
• Documentation
• Maintain records of completed installations, repairs, and inspections.
• Assist in preparing reports on plumbing works and materials used.
• Material & Tools Management
• Identify required materials, tools, and equipment for each project stage.
• Ensure proper use and safe storage of plumbing tools and equipment.

Job Type: Full-time

The Junior HR Specialist position has been mislabeled, as the job description provided is for a Plumbing Drafter. Here is the refined description for the actual role discussed:

Job Description:

The Plumbing Drafter will be responsible for preparing detailed designs and diagrams for plumbing systems, working closely with engineers and architects to develop optimal and cost-effective solutions. This role ensures that all designs comply with building codes, regulations, and project requirements.

Key Responsibilities

• Analyze architectural plans and project specifications to prepare comprehensive plumbing designs.
• Coordinate with architects, engineers, and contractors to ensure plumbing designs integrate seamlessly with other building systems.
• Ensure all plumbing designs are fully compliant with building codes, safety standards, and project specifications.
• Revise and update drawings as required based on project needs, modifications, or feedback.
• Maintain accurate and organized documentation of all plumbing drafts and designs.

Required Skills and Competencies

• Strong knowledge of plumbing systems, fixtures, and layouts for accurate drafting.
• Excellent mathematical and analytical skills for precise calculations and measurements.
• High attention to detail to ensure all designs comply with plumbing codes and standards.
• Proficiency in CAD software (AutoCAD, Revit, or similar) for drafting and design.

Seniority level: Mid-Senior level

Employment type: Full-time

Job function: Not Management, but rather a specialized drafting role

Industries: Construction

Job Description:

The Plumbing Drafter will be responsible for preparing detailed designs and diagrams for plumbing systems, working closely with engineers and architects to develop optimal and cost-effective solutions. This role ensures that all designs comply with building codes, regulations, and project requirements.

Key Responsibilities

• Analyze architectural plans and project specifications to prepare comprehensive plumbing designs.
• Coordinate with architects, engineers, and contractors to ensure plumbing designs integrate seamlessly with other building systems.
• Ensure all plumbing designs are fully compliant with building codes, safety standards, and project specifications.
• Revise and update drawings as required based on project needs, modifications, or feedback.
• Maintain accurate and organized documentation of all plumbing drafts and designs.

Required Skills and Competencies

• Strong knowledge of plumbing systems, fixtures, and layouts for accurate drafting.
• Excellent mathematical and analytical skills for precise calculations and measurements.
• High attention to detail to ensure all designs comply with plumbing codes and standards.
• Proficiency in CAD software (AutoCAD, Revit, or similar) for drafting and design.

We are looking for a Pipefitter or Plumber with a minimum of 3 years of experience in installing, assembling, and repairing water supply piping systems.

Job Type: Full-time