114 Preventative Maintenance jobs in Bahrain
MAINTENANCE TECHNICIAN
Posted 5 days ago
Job Viewed
Job Description
Assistance Multi-Task Senior Technician can attend and carry out repair and preventive maintenance works for air conditioning & ventilation units, electrical distribution systems, water supply systems, and plumbing for Gulf Aviation buildings.
MAIN DUTIES- Attend work order requests from client (GAA/GF) to repair and maintain Air conditioning & ventilation HVAC (including Chilled water system), Electrical/Mechanical/Plumbing (MEP) i.e. electrical circuits and power distribution systems, water supply, sanitary fittings, storage water tanks, water pumps, plumbing, and drainage.
- Assist in carrying out applicable preventive maintenance program (PPM) for the above-mentioned building services and equipment according to equipment manufacturer’s recommendations and GFG Facilities Management directions.
- Assist in preparation of daily and monthly service reports including Chiller’s daily inspection report for the above-mentioned Building Services and equipment for attention and action of GFG FM.
- Assist in preparation of list of necessary spares required for the satisfactory completion of the above-mentioned PPM and routine maintenance.
- Assist in preparation of report to GFG FM on the required spares and verify the defective spares; moreover, provide root cause of failure report including carrying out troubleshooting for better performance of the equipment.
- Attend emergency breakdown calls during normal working hours and if required after normal working hours.
- Attend and close work order requests as soon as possible and report status of the works i.e. completed, on-hold, and which are not completed and provide justification for delays.
- Assist Senior Technician to update list of existing equipment and building service installations for preparation of maintenance schedules or program of works.
- Follow-up and supervise outsourced maintenance contractors and ensure that preventive maintenance activities are carried out properly for the special type equipment and services e.g., firefighting & Fire alarm, UPS, Stand-by Generators, Chiller unit, and swimming pool equipment.
Holder of Diploma/High National Diploma in Mechanical Engineering and Technical High School Certificate in Air conditioning engineering or equivalent.
EXPERIENCEMinimum 3-5 years with any reputable Air-conditioning Contractor or Building Services Facilities Management company in the capacity of Air-conditioning Mechanic and Electrician.
APPLICATION PROCESSIf you meet the criteria and you are enthusiastic about the role, we would welcome your application. To complete the application you would need the following document(s):
#J-18808-LjbffrLINE MAINTENANCE TECHNICIAN
Posted 3 days ago
Job Viewed
Job Description
Join to apply for the LINE MAINTENANCE TECHNICIAN role at Thales
Join to apply for the LINE MAINTENANCE TECHNICIAN role at Thales
Thales people architect solutions that enable two-thirds of planes to take off and land safely. We create in-flight entertainment systems that engross 50 million fliers every year and we develop the avionics that control the world’s largest commercial aircrafts. Our simulators train the next generation of pilots for fighter jets, transporters and search and rescue helicopters. And, together, each and every member of our aerospace team makes a difference.
JOB OBJECTIVE
Maintain IFEC system on Customer fleet during transit and scheduled checks in a line maintenance environment
Functions & Responsibilities
- Responsible for troubleshooting and testing of IFEC system on-board customer aircrafts in accordance with approved documentation, applicable regulations, and local policy and procedures.
- Ensure adequate qualification to perform task assigned in accordance with the applicable Thales procedures.
- Document work accomplished in accordance with customer’s requirements, Thales and the station specific procedures.
- Use the appropriate GSE equipment for performing the assigned task.
- Performs data and administrative entries using the applicable Maintenance Tracking and documentation systems.
- Accountable for the use of the proper calibrated tools to perform the tasks.
- Checking the work after completion to ensure integrity and pay attention to details.
- Ensure the cleanliness of facility, tools, vehicles and equipment used.
- Use safety net when performing task assigned.
- Follow calibration rules when using calibrated tool.
- Report unsafe act and prevent unsafe behavior.
- Assist other Line Maintenance Technicians when required.
- Comply with Thales Quality and Safety manuals.
- Knowledge of electronics and troubleshooting generally acquired through commercial aviation or technical school education combined with related industry experience (Avionics/IFE) with an airline.
- Bachelor of Science in Aviation Electronics and/or Communication Engineering is preferred.
- Holder of a valid Aircraft Mechanic ICAO licence is a must.
- Communication Skills - Advanced
- Computer skills - Advanced
- English Language skills - Advanced
Seniority level
- Seniority level Not Applicable
- Employment type Full-time
- Job function Management and Manufacturing
- Industries Aviation and Aerospace Component Manufacturing and Defense and Space Manufacturing
Referrals increase your chances of interviewing at Thales by 2x
Sign in to set job alerts for “Maintenance Technician” roles.Manama, Capital Governorate, Bahrain 21 hours ago
Al Khobar, Eastern, Saudi Arabia 1 month ago
Manama, Capital Governorate, Bahrain 2 days ago
Askar, Southern Governorate, Bahrain 4 days ago
Manama, Capital Governorate, Bahrain 2 months ago
The International school of Choueifat, Muharraq Governorate, Bahrain 1 week ago
We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.
#J-18808-LjbffrAIRCRAFT MAINTENANCE TECHNICIAN
Posted 5 days ago
Job Viewed
Job Description
Company: Gulf Air
Division: Technical
Location: (Location)
Department: Maintenance
Closing Date: 21-Aug-2025
Main ObjectivesTo carry out tasks as designated by the Aircraft Lic Maintenance Technician or Aircraft Maintenance Engineer to an acceptable standard of workmanship, and in accordance with aircraft approved documents.
To support Gulf Air operation at any network station as required in case of AOG recovery or as necessary.
- Work with, and under the direction of the designated A/C Engineers/Lic Technicians to carry out routine tasks and non-routine tasks.
- Replace components on Company or other operators aircraft and engines as required.
- Strictly adhere to company staff rules and regulations.
- Strictly adhere to company safety rules and regulations and to wear proper uniform and safety shoes while on duty.
- Adhere and comply with aircraft approved maintenance documents instructions when performing any routine tasks and non-routine tasks and acquaint self with all the safety-related precautions to avoid personal injuries or damages to aircraft structures and systems.
- Make sure that all equipment and tools used for aircraft maintenance are in serviceable and safe condition. Report any faulty equipment or tool to Engineer or Duty Manager; unserviceable tool/equipment must be isolated and tagged.
- Service equipment and aircraft special tools as deemed necessary to maintain them in a serviceable, safe and clean condition.
- As part of maintenance practice, make sure that all tools used to perform any routine and non-routine task are registered, to ensure they are removed on task completion.
- On completion of routine tasks and non-routine tasks, make sure that work area is tidy and free from any loose articles.
- Assist in positioning and clearing equipment to carry maintenance tasks on aircraft.
- Make sure that all tools and equipment used are returned to proper location.
- Perform the headset duties during engine ground runs and aircraft towing in accordance with company TIM procedures.
- Adhere to Airside Safety Rules and Regulations in regard to driving and work area cleanliness.
- Purchase an approved tool kit containing appropriate tools to perform duties on the company and third-party fleets.
- Perform the required duties in accordance with AME and Duty Manager instructions and aircraft approved documentation procedures.
- Maintain a high level of self-discipline and respect for superiors' instructions.
- Become familiar with Gulf Air Information System AMOS and its basic transactions related to this work scope.
It will be advantageous to have 3 to 5 years working as an A/C technician and/or general experience in a similar field. An apprenticeship with a reputable Aircraft Maintenance Organization shall be an additional advantage.
QualificationsMust be able to write, read and understand English to be able to understand aircraft approved documentation procedures while performing routine and non-routine tasks on the company fleet during maintenance input.
It will be an advantage to pass Basic Aircraft License Modules or hold a valid EASA Basic Aircraft License or equivalent which is recognized by BCAA and company Technical Quality Assurance.
GE13P
About Application ProcessIf you meet the criteria and you are enthusiastic about the role, we would welcome your application. To complete the application, you would need the following document(s):
#J-18808-LjbffrAircraft Maintenance Technician
Posted today
Job Viewed
Job Description
HVAC Maintenance Technician
Posted today
Job Viewed
Job Description
Aircraft Maintenance Technician
Posted today
Job Viewed
Job Description
Key Responsibilities:
- Perform routine and complex maintenance tasks on aircraft, including inspections, repairs, and replacements of parts and systems.
- Diagnose and troubleshoot mechanical, electrical, and avionics issues using appropriate tools and test equipment.
- Interpret technical manuals, blueprints, and schematics to guide maintenance activities.
- Ensure all maintenance is carried out in accordance with manufacturer specifications and regulatory requirements (e.g., EASA, FAA).
- Document all maintenance performed accurately and thoroughly in the aircraft logbooks and maintenance records.
- Maintain a clean and organized workspace, ensuring proper tool accountability.
- Adhere strictly to all safety procedures and regulations to prevent accidents and ensure personnel safety.
- Participate in ongoing training and professional development to stay current with industry advancements.
- Collaborate effectively with other maintenance personnel and flight crews.
- Perform functional checks of aircraft systems after maintenance.
- Report any observed discrepancies or defects to the appropriate supervisor.
Qualifications:
- High school diploma or equivalent.
- Valid Aircraft Maintenance Technician (AMT) license or equivalent certification (e.g., EASA Part-66).
- Minimum of 3-5 years of hands-on experience in aircraft maintenance.
- Proficiency in troubleshooting and repairing aircraft systems, including engines, airframes, avionics, and electrical systems.
- Strong knowledge of aviation maintenance regulations and best practices.
- Ability to read and interpret technical documentation and schematics.
- Excellent mechanical aptitude and manual dexterity.
- Strong problem-solving and diagnostic skills.
- Good communication and teamwork abilities.
- Must be able to pass a background check and drug screening.
- Flexibility to work shifts, including weekends and holidays as required.
Mechanical Maintenance Technician
Posted today
Job Viewed
Job Description
Be The First To Know
About the latest Preventative maintenance Jobs in Bahrain !
Field Maintenance Technician
Posted today
Job Viewed
Job Description
Responsibilities:
- Perform installation, maintenance, and repair of mechanical, electrical, and hydraulic systems.
- Diagnose and resolve equipment malfunctions and breakdowns promptly.
- Conduct routine inspections and preventative maintenance to ensure optimal equipment performance.
- Read and interpret technical manuals, blueprints, schematics, and diagrams.
- Use a variety of hand and power tools, testing equipment, and diagnostic instruments.
- Ensure all work is completed safely, efficiently, and according to established procedures and standards.
- Document all maintenance and repair activities accurately in service reports.
- Maintain a clean and organized work area and company vehicle.
- Adhere to all safety regulations, including lockout/tagout procedures.
- Communicate effectively with customers and site personnel regarding work performed and recommendations.
- Manage inventory of spare parts and supplies in service vehicles.
- Respond to emergency service calls as required.
- Provide technical support and training to end-users where necessary.
- Identify opportunities for equipment upgrades or process improvements.
- High school diploma or equivalent; Technical certification or vocational training in a relevant trade (e.g., mechanical, electrical) is highly preferred.
- Proven experience as a Maintenance Technician or in a similar field.
- Strong mechanical, electrical, and troubleshooting skills.
- Proficiency in using diagnostic tools and testing equipment.
- Ability to read and understand technical documentation.
- Excellent problem-solving abilities and attention to detail.
- Good physical condition, with the ability to lift heavy objects and work in various environments.
- Valid driver's license and a clean driving record.
- Strong communication and customer service skills.
- Ability to work independently with minimal supervision.
- Flexibility to travel to different sites and work varying hours when needed.
HVAC Maintenance Technician
Posted today
Job Viewed
Job Description
Aircraft Maintenance Technician
Posted today
Job Viewed