108 Vending Machine jobs in Bahrain

Assistance Multi-Task Senior Technician can attend and carry out repair and preventive maintenance works for air conditioning & ventilation units, electrical distribution systems, water supply systems, and plumbing for Gulf Aviation buildings.

1. Attend work order requests from client (GAA/GF) to repair and maintain Air conditioning & ventilation HVAC (including Chilled water system), Electrical/Mechanical/Plumbing (MEP) i.e. electrical circuits and power distribution systems, water supply, sanitary fittings, storage water tanks, water pumps, plumbing, and drainage.
2. Assist in carrying out applicable preventive maintenance program (PPM) for the above-mentioned building services and equipment according to equipment manufacturer’s recommendations and GFG Facilities Management directions.
3. Assist in preparation of daily and monthly service reports including Chiller’s daily inspection report for the above-mentioned Building Services and equipment for attention and action of GFG FM.
4. Assist in preparation of list of necessary spares required for the satisfactory completion of the above-mentioned PPM and routine maintenance.
5. Assist in preparation of report to GFG FM on the required spares and verify the defective spares; moreover, provide root cause of failure report including carrying out troubleshooting for better performance of the equipment.
6. Attend emergency breakdown calls during normal working hours and if required after normal working hours.
7. Attend and close work order requests as soon as possible and report status of the works i.e. completed, on-hold, and which are not completed and provide justification for delays.
8. Assist Senior Technician to update list of existing equipment and building service installations for preparation of maintenance schedules or program of works.
9. Follow-up and supervise outsourced maintenance contractors and ensure that preventive maintenance activities are carried out properly for the special type equipment and services e.g., firefighting & Fire alarm, UPS, Stand-by Generators, Chiller unit, and swimming pool equipment.

Holder of Diploma/High National Diploma in Mechanical Engineering and Technical High School Certificate in Air conditioning engineering or equivalent.

Minimum 3-5 years with any reputable Air-conditioning Contractor or Building Services Facilities Management company in the capacity of Air-conditioning Mechanic and Electrician.

If you meet the criteria and you are enthusiastic about the role, we would welcome your application. To complete the application you would need the following document(s):

• Conduct thorough diagnostic assessments on vehicle issues using advanced scanning tools and diagnostic software.
• Perform complex repairs and maintenance on engine, transmission, drivetrain, braking, suspension, steering, and electrical systems.
• Interpret technical service bulletins (TSBs) and repair manuals to ensure adherence to manufacturer specifications.
• Perform routine maintenance services, including oil changes, fluid flushes, and filter replacements, to high standards.
• Communicate effectively with service advisors regarding repair needs, estimated timeframes, and costs.
• Maintain a clean and organized workspace, ensuring all tools and equipment are properly handled and stored.
• Stay updated with the latest automotive technologies and repair techniques through continuous training and professional development.
• Mentor and guide junior technicians, sharing expertise and best practices.
• Ensure all repairs are performed safely and efficiently, adhering to all safety protocols.

• Proven experience as an Automotive Technician, with at least 5 years of relevant experience.
• Master Automotive Technician certification (ASE) or equivalent is highly preferred.
• Proficiency in using diagnostic equipment, oscilloscopes, multimeters, and scan tools.
• Strong mechanical aptitude and problem-solving skills.
• Excellent knowledge of automotive systems and their interdependencies.
• Ability to work independently and as part of a team in a fast-paced environment.
• Valid driving license and a clean driving record.
• Strong commitment to customer satisfaction and quality workmanship.

Company: Gulf Air

Division: Technical

Location: (Location)

Department: Maintenance

Closing Date: 21-Aug-2025

To carry out tasks as designated by the Aircraft Lic Maintenance Technician or Aircraft Maintenance Engineer to an acceptable standard of workmanship, and in accordance with aircraft approved documents.

To support Gulf Air operation at any network station as required in case of AOG recovery or as necessary.

1. Work with, and under the direction of the designated A/C Engineers/Lic Technicians to carry out routine tasks and non-routine tasks.
2. Replace components on Company or other operators aircraft and engines as required.
3. Strictly adhere to company staff rules and regulations.
4. Strictly adhere to company safety rules and regulations and to wear proper uniform and safety shoes while on duty.
5. Adhere and comply with aircraft approved maintenance documents instructions when performing any routine tasks and non-routine tasks and acquaint self with all the safety-related precautions to avoid personal injuries or damages to aircraft structures and systems.
6. Make sure that all equipment and tools used for aircraft maintenance are in serviceable and safe condition. Report any faulty equipment or tool to Engineer or Duty Manager; unserviceable tool/equipment must be isolated and tagged.
7. Service equipment and aircraft special tools as deemed necessary to maintain them in a serviceable, safe and clean condition.
8. As part of maintenance practice, make sure that all tools used to perform any routine and non-routine task are registered, to ensure they are removed on task completion.
9. On completion of routine tasks and non-routine tasks, make sure that work area is tidy and free from any loose articles.
10. Assist in positioning and clearing equipment to carry maintenance tasks on aircraft.
11. Make sure that all tools and equipment used are returned to proper location.
12. Perform the headset duties during engine ground runs and aircraft towing in accordance with company TIM procedures.
13. Adhere to Airside Safety Rules and Regulations in regard to driving and work area cleanliness.
14. Purchase an approved tool kit containing appropriate tools to perform duties on the company and third-party fleets.
15. Perform the required duties in accordance with AME and Duty Manager instructions and aircraft approved documentation procedures.
16. Maintain a high level of self-discipline and respect for superiors' instructions.
17. Become familiar with Gulf Air Information System AMOS and its basic transactions related to this work scope.

It will be advantageous to have 3 to 5 years working as an A/C technician and/or general experience in a similar field. An apprenticeship with a reputable Aircraft Maintenance Organization shall be an additional advantage.

Must be able to write, read and understand English to be able to understand aircraft approved documentation procedures while performing routine and non-routine tasks on the company fleet during maintenance input.
It will be an advantage to pass Basic Aircraft License Modules or hold a valid EASA Basic Aircraft License or equivalent which is recognized by BCAA and company Technical Quality Assurance.

GE13P

If you meet the criteria and you are enthusiastic about the role, we would welcome your application. To complete the application, you would need the following document(s):

• Execute scheduled preventative maintenance tasks on all plant machinery and equipment according to established procedures.
• Diagnose and repair mechanical, electrical, pneumatic, and hydraulic malfunctions in a timely and efficient manner.
• Respond to equipment breakdowns and troubleshoot issues to identify root causes and implement effective solutions.
• Read and interpret blueprints, schematics, and technical manuals to perform repairs and modifications.
• Maintain accurate records of all maintenance activities, including work performed, parts used, and time spent.
• Assist in the installation of new equipment and systems.
• Adhere to all safety regulations and company policies, ensuring a safe work environment.
• Calibrate and test equipment to ensure it meets operational specifications.
• Contribute to continuous improvement initiatives by identifying opportunities to enhance equipment reliability and performance.
• Maintain inventory of spare parts and supplies, and recommend reorder points.
• Perform general facility maintenance as needed, including minor repairs to structures, plumbing, and grounds.
• Work collaboratively with production teams to coordinate maintenance activities and minimize disruption to operations.

• High school diploma or equivalent; vocational training or certification in a relevant trade (e.g., mechanical, electrical) is highly desirable.
• Proven experience (3+ years) as an Industrial Maintenance Technician or in a similar role.
• Strong understanding of mechanical, electrical, hydraulic, and pneumatic systems.
• Proficiency in reading and interpreting technical drawings and schematics.
• Experience with diagnostic tools and equipment.
• Knowledge of safety procedures and best practices in an industrial setting.
• Ability to work independently and as part of a team.
• Good problem-solving skills and attention to detail.
• Willingness to work shifts or overtime as required.
• Physical stamina to perform manual labor and work in various environmental conditions.

• Perform routine preventative maintenance on industrial machinery and equipment according to established schedules.
• Diagnose and repair mechanical, electrical, pneumatic, and hydraulic system failures.
• Install, troubleshoot, and maintain a variety of industrial equipment, including pumps, motors, conveyors, and control systems.
• Read and interpret blueprints, schematics, and technical manuals to perform repairs.
• Use precision measuring instruments and diagnostic tools to identify issues.
• Fabricate parts and components as needed using machine shop equipment.
• Ensure all work is performed safely and in compliance with company safety policies and regulations.
• Maintain accurate records of all maintenance activities, including repairs, parts used, and time spent.
• Respond promptly to equipment malfunctions and emergency repair needs.
• Collaborate with production teams to ensure minimal disruption to operations.
• Recommend improvements to equipment and maintenance procedures.
• Maintain a clean and organized work environment.

• High school diploma or equivalent; vocational training or apprenticeship in industrial maintenance is highly preferred.
• Minimum of 3-5 years of experience as an Industrial Maintenance Technician or in a similar role.
• Proficiency in diagnosing and repairing mechanical, electrical, hydraulic, and pneumatic systems.
• Strong understanding of PLCs and industrial control systems.
• Ability to read and interpret electrical schematics and mechanical blueprints.
• Experience with welding, machining, and fabrication is a plus.
• Knowledge of lockout/tagout procedures and other safety protocols.
• Excellent troubleshooting and problem-solving skills.
• Strong attention to detail and ability to work with precision.
• Ability to work independently and as part of a team.
• Good communication skills.
• Physical ability to lift heavy objects and work in various industrial environments.

• Perform routine preventative maintenance on building systems including HVAC, plumbing, electrical, and lighting.
• Diagnose and repair a variety of maintenance issues within the facilities.
• Respond promptly to maintenance requests and emergency calls.
• Conduct general repairs, including carpentry, painting, and minor structural work.
• Ensure all work is performed safely and in accordance with company policies and procedures.
• Maintain cleanliness and orderliness of all assigned work areas and equipment.
• Assist with grounds maintenance, including landscaping and snow removal as needed.
• Keep accurate records of maintenance activities, parts used, and time spent.
• Manage inventory of maintenance supplies and spare parts, reordering as necessary.
• Inspect facilities regularly to identify potential maintenance needs.

• High school diploma or equivalent. Vocational training in a related field is a plus.
• Minimum of 3 years of experience in facilities maintenance, building maintenance, or a related trade.
• Proficiency in general maintenance tasks, including plumbing, electrical, HVAC, and carpentry.
• Ability to read and interpret blueprints and technical manuals.
• Strong troubleshooting and problem-solving skills.
• Knowledge of safety regulations and best practices for maintenance work.
• Ability to work independently and manage time effectively.
• Good physical condition and ability to lift heavy objects and work in various environmental conditions.
• Excellent communication and interpersonal skills.